Posts

2nd Elec Task Force Meeting Announced

Subject: UFTO Note – 2nd Elec Task Force Meeting Announced
Date: Mon, 10 Mar 1997 14:34:52 +0000
From: Ed Beardsworth

(advance notice just received from DOE–to appear in Fed Register)

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–
[6450-01-P]
DEPARTMENT OF ENERGY
Secretary of Energy Advisory Board
Notice of Open Meeting
AGENCY: Department of Energy
SUMMARY: Consistent with the provisions of the Federal Advisory Committee Act (Public Law 92-463, 86 Stat. 770), notice is hereby given of the following advisory committee meeting:

Name: Secretary of Energy Advisory Board – Electric System Reliability Task Force
Dates and Times: Tuesday, March 25, 1997, 8:00 AM – 4:00 PM
Place: The Madison Hotel, Dolley Madison Ballroom
15th and M Streets, NW Washington, D.C. 20005

FOR FURTHER INFORMATION CONTACT:
Richard C. Burrow, Secretary of Energy Advisory Board (AB-1),
U.S. Department of Energy, 1000 Independence Avenue, SW, Washington, DC 20585,
(202) 586-1709 or (202) 586-6279 (fax).

SUPPLEMENTARY INFORMATION:
Background
The electric power industry is in the midst of a complex transition to competition, which will induce many far-reaching changes in the structure of the industry and the institutions which regulate it. This transition raises many reliability issues, as new entities emerge in the power markets and as generation becomes less integrated with transmission.

Purpose of the Task Force

The purpose of the Electric System Reliability Task Force is to provide advice and recommendations to the Secretary of Energy Advisory Board regarding the critical institutional, technical, and policy issues that need to be addressed in order to maintain the reliability of the nation’s bulk electric system in the context of a more competitive industry.

Tentative Agenda

8:00 – 8:15 Opening Remarks & Objectives
Philip Sharp, Chairman, Electric System Reliability Task Force
8:15 – 9:15 Discussion: Assumptions Regarding the Future Electricity
Industry
9:15 – 10:15 Discussion: Basic Concepts and Operating Requirements for Electric System Reliability
10:15 – 10:30 Break
10:30 – 11:45 Panel Discussion & Roundtable: Policy and Institutional Issues,
Panelists: NERC, Power Marketer, & DOE
11:45 – 12:00 Public Comment
12:00 – 1:15 Lunch
1:15 – 3:45 Panel Discussion & Roundtable: Policy and Institutional Issues (Continued),
Panelists: NERC, Power Marketer, & DOE
3:45 – 4:00 Scheduling of Next Meeting
4:00 Adjourn

This tentative agenda is subject to change. The final agenda will be available at the meeting.

Public Participation
The Chairman of the Task Force is empowered to conduct the meeting in a fashion that will, in the Chairman’s judgment, facilitate the orderly conduct of business. During its meeting in Washington, D.C. the Task Force welcomes public comment. Members of the public will be heard in the order in which they sign up at the beginning of the meeting. The Task Force will make every effort to hear the views of all interested parties. Written comments may be submitted to David Cheney, Acting Executive Director, Secretary of Energy Advisory Board, AB-1, 1000 Independence Avenue, SW, Washington, DC 20585.

Minutes

Minutes and a transcript of the meeting will be available for public review and copying approximately 30 days following the meeting at the Freedom of Information Public Reading Room, 1E-190 Forrestal Building, 1000 Independence Avenue, SW, Washington, DC, between 9:00 AM and 4:00 PM, Monday through Friday except Federal holidays.

Issued at Washington, DC, on
Rachel Samuel Acting Deputy Advisory Committee Management Officer

DOE Electric Reliability TF Meeting Minutes

Subject: UFTO Note – DOE Electric Reliability TF Meeting Minutes
Date: Thu, 27 Feb 1997 09:16:14 -0800
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

Attached are the approved minutes of the first meeting of the Electric System Reliability Task Force. The minutes were approved by Chairman Phil Sharp on February 24, 1997.

=====================================
NEXT MEETING:
The second meeting of the Task Force will be held in Washington DC on March 25th at the Madison Hotel. The meeting will tentatively start at 8:00 AM and last until 4:00 PM.

The meeting will tentatively include:

1) A discussion of “Assumptions Regarding the Future Electricity Industry”, based on a paper by Theresa Flaim entitled “A Vision of the Competitive Electricity Market – What’s Clear, What Isn’t”.

2) A discussion of the “Basic Concepts and Operating Requirements for Electric System Reliability”, based on a staff paper.

3) A discussion of “Policy and Institutional Issues”, where staff from NERC, DOE and a Power Marketer will present their views on how policy and institutional reliability issues should be addressed.

4) Planning and Scheduling of Future Meetings.

A Federal Register Notice will be published at least 2 weeks before the meeting. It will include the agenda and principal speakers.

========================================================

Secretary of Energy Advisory Board Task Force on Electric System Reliability Minutes of First Task Force Meeting January 16, 1997

J.W. Marriott Hotel Washington, D.C.

1.0 Opening Remarks and Perspectives

The first meeting of the Secretary’s Task Force on Electric System Reliability was held on January 16, 1997, in the J.W. Marriott hotel, Washington, D.C. Robert Hanfling, Chairman, Secretary of Energy Advisory Board (SEAB) opened the meeting at 8:30 am with a brief welcome to the members and an introduction of the Task Force Chairman, Philip Sharp (the Chairman).

The Chairman thanked the members for agreeing to participate on the Task Force and expressed his respect for the work they do in “keeping the lights on.” He recalled the major electrical outages in the West last summer as painful reminders of what happens when the lights do go out. He called attention to the great changes taking place now in the electric power industry (e.g., participants, demands, economic incentives) and stressed that one of the main goals of this Task Force was to make sure that reliability did not get lost in the transition. He then introduced Deputy Secretary of Energy Charles B. Curtis.

Deputy Secretary Curtis thanked the members for interrupting busy schedules and expressed his hope that the work of this panel will be useful for present and future generations. He observed that the industry is irreversibly committed to restructuring and stressed the need to assure that reliability is afforded its proper place for consideration in the evolving change. He commented that with the continued economic growth and development in our country, blackouts are debilitating to our economy and becoming even more so. The Deputy Secretary offered seven specific challenges to the Task Force:

-Although the bulk electric power system has functioned well under a sense of voluntarism, thanks largely to the North American Electric Reliability Council (NERC) and its regional councils, will voluntarism be sufficient to assure reliability under the new paradigm?

-Are federal authorities adequate and are they properly lodged in the right agencies (e.g., DOE, FERC)?

-Given the advances which have taken place in industry technology, operational procedures and training, which permit the system to be operated closer to the margins, are we asking operators to do more than is reliably possible?

-Given the evolving changes in economic incentives which underpin the industry, is the industry likely to continue to invest wisely and adequately in R&D?

-Given that the concept of an independent system operator, in one form or another, is under strong consideration in many states, is that concept necessary and sufficient for maintaining a secure and reliable system?

-Is the balance between federal/state regulations proper, and is it possible that the states could do more to assure reliability?

-Given that the 105th Congress intends to focus sharply on electricity restructuring during this session and that the Administration will likely submit legislation this year, what are the recommendations of this Task Force?

2.0 Task Force Member Introductions

Following these remarks, the Chairman asked each of the 18 present and three telecommunicating members of the Task Force to introduce themselves, briefly describe their background and describe any areas in which they felt their expertise might be especially helpful to the group.

3.0 Institutional Reliability Issues

The Chairman then introduced Mr. Michehl Gent, President, North American Electric Reliability Council (NERC), to discuss institutional reliability issues. Mr. Gent briefly described the three interconnections and noted that the regions, now numbered at ten, initially were formed by the people in each region to address the unique needs of that region. There was no intent then to make them similar since there was no thought of sending power from Minneapolis to Florida. As a result of changes, both those which have taken place already and those anticipated, the regions are becoming more alike in terms of their electric power planning and operations. He recalled events leading to the formation of NERC in 1968 after the northeast blackout of Nov. 9, 1965, and described its three primary objectives; to establish standards, measure performance, and ensure compliance. Of special note, he thought, were actions taken by NERC to adapt to evolving changes in ownership and access. By way of example, he noted that membership on the Board of Trustees had increased to 34 with representation by all segments of the industry, and also that the number of organizations with observer status had increased. Mr. Gent then introduced Don Benjamin, NERC’s Director of Operations, to discuss some of the specific activities underway within the industry to assure reliable operations in the new environment.

Mr. Benjamin highlighted a number of current initiatives, in areas of: operational security; transmission use; operating standards, interconnected operations services; and, actions to address major outages in the West last summer. He concluded with a summary statement of goals for a reliable electric system which can accommodate the marketplace by:

-operators having the “big picture” at all times; -analyzing transactions before they are consummated; -ensuring compliance with NERC policies; -establishing a program of system operator certification; and, -defining requirements for interconnected operations services.

Mr. Benjamin described in some detail NERC’s previous approach to operational security in which interconnected but nearly autonomous systems have operated through about 150 control areas established so as to be able to operate so that problems are contained within the area and do not pass beyond the boundaries. He indicated that goal is becoming more difficult to achieve on a control area basis with the increased role of market entities and open access. To supplement the control centers, the industry is moving toward security coordinators, fewer in number at twenty-two, with responsibilities to perform security analysis based on interchange schedules, coordinate emergency operations (e.g., transmission overload relief, load reductions), manage the interregional security network, and develop operating policies as may be needed. In terms of status, he advised that regional security plans are in place, coordinators exist and will have their first meeting in February, and that necessary databases are known and in preparation.

In response to a question (Cavanagh) of whether the new security system can handle tens of thousands of transactions/hour, Mr. Benjamin noted that: “We’ll have to. We probably can’t today…but we’re closer today than we were 5 years ago. With computer technology…it should be possible. Multi-regional models handle the flows and will be updated continuously. They will be able to reflect, ideally, what is really happening in the system.” Mr. Budhraja stressed the big difference between physical and financial transaction systems noting that the number of generators and points of consumption will not change, while financial transactions can number in the thousands.

The Chairman asked the status of the models NERC uses to monitor security and was informed by Mr. Benjamin that they have existed and been kept current for years. What is not in place yet is the ability of the operators to access those models in real-time. That capability is undergoing development right now. Once real-time access is possible by all operators, they can test a transaction real-time and, if it is feasible, conclude it.

4.0 Technical Reliability Issues

The Chairman then introduced Dr. Karl Stahlkopf, Vice President, Power Delivery, Electric Power Research Institute (EPRI), to discuss technical reliability issues. After a brief review of differences between design objectives for the system and the way it is being operated today, Dr. Stahlkopf moved on to discuss the causes of and lessons from last year’s major outages in the West.

After a brief background review of the record heat and unusual power flows which preceded the August 10 outage, Dr. Stahlkopf described its chronology. He then summarized the basic causes of the outage as follows:

-systems were stressed; -not enough reactive support/control in the area; -initiating conditions not studied before; -operators did not know system was insecure; -no one had the “big picture”; and, -reliability impact of maintenance not understood.

As far as lessons learned, Dr. Stahlkopf said he did not believe restructuring was a factor in the outage; rather, the system simply was stressed due to hot weather. On the other hand, he did believe that financial incentives were a factor (i.e., cheap hydro-power in Northwest); they caused flow patterns which were unusual for that time of year and, coincidently, had not been studied. Regarding lack of reactive support in the Western System Coordinating Council (WSCC) at that time, Dr. Stahlkopf noted ongoing studies by NERC and EPRI aimed at determining whether this is a chronic problem.

On the subject on maintenance impacts on reliability, Dr. Stahlkopf noted that BPA had increased their vegetation maintainance budget because of a wetter and hotter than normal growing season but questioned whether, in a competitive market, financial disincentives would exist to cause utilities to try and limit their expenditures on maintainance. Members of the Task Force agreed that this aspect must be addressed.

Dr. Stahlkopf moved on to a discussion of technology improvements that might help avoid such an occurrence in the future. He mentioned three major improvements as being Flow Actuated Control Thyristors (FACTS), Static Compensator (STATCOM), and Unified Power Flow Controller and summarized the likely contributions to reliability of each. One member of the Task Force (Budhraja) commented that all of these devices contribute to getting more out of the installed system and observed the obvious reliability implications. He questioned whether the industry should also be thinking about adding to transmission systems so they don’t have to be operated so close to their limit.

After brief discussions of the Wide Area Measuring System (WAMS), an operations data system, and several EPRI initiatives targeted on maintenance, Dr. Stahlkopf concluded that near-term technologies may improve reliability in four areas: operating tools; transmission system “agility”; monitoring and communications; and, reducing maintenance costs reliably.

5.0 State Reliability Issues

The subject of state reliability issues was addressed by the Honorable Duncan Kincheloe, Commissioner, Missouri Public Service Commission. Mr. Kincheloe said that, while states have historically engaged in regulating the power industry, can establish standards for voltage regulation, govern service priorities for restoration and curtailment, and can set standards for reserve margins, they now face prospects of diminished success in regulatory actions and need new mechanisms to look at reliability. In this regard, he suggested several areas which may warrant further consideration.

-in the area of generation and supply, he acknowledged that: past assurance of rate-based adjustments (by states) to cover investments in capacity may have undergirded utilities’ willingness to invest; and, whereas local distribution companies had responsibilities to restore service in past emergencies as a consequence of franchised territories, this may no longer apply in a competitive future.

-in the area of Federal regulation, he said: if Congress legislates retail competition, states must have authority to demand evidence of experience at providing service/reliability for new market entrants; and, if Congress legislates a (minimum) reliability standard, states would want the responsibility to assure compliance-according to historical roles- and the authority to tighten the standard, if desired.

He concluded with his opinion that states are very much in the transmission regulation business but have major concerns (with the Federal Energy Regulatory Commission (FERC)) with the issue of jurisdiction over unbundled retail power.

After the lunch break, the Chairman announced his intention to open the floor for public comment, followed by a return to member discussions on Mr. Kincheloe’s presentation.

During the public comment period, one observer rose to discuss the use of direct current on the bulk power system and noted that it is on the increase. His consulting company has been advising customers to “move away from the grid” toward more reliance on direct current and he hoped that the Task Force would consider this evolving trend in the industry.

There being no further comment by the public, the Chairman returned to discussions on Mr. Kincheloe’s presentation. During the discussion that followed, a question was raised (Holden) regarding the status of the federal/state transaction “debate. Mr. Kincheloe answered that FERC has asserted jurisdiction over certain unbundled components which heretofore had been within the purview of the states (e.g., retail transactions involving some component of the transmission system). Under the unbundling, FERC has now asserted jurisdiction.

In another area, a question was raised (Dragoumis) as to whether there have been any attempts to establish state compacts (i.e., agreements between two or more states) to set reliability rules and standards. The Chairman noted that states may propose to Congress the approval of compacts, and Congress usually approves them. The problem is that it is unlikely for states to propose compacts on very complex issues because it is so difficult for them to agree on the details.

One member (Meyer) questioned how states would be likely to handle suppliers who have, say, only one generator and whether they would require 100% reserve. While this was considered unlikely, it was also the case that the state probably wouldn’t want to impose very stringent requirements either because the suppliers would be likely to withdraw from doing business in their state….and that would affect the level of competition.

Another member (Flaim) stressed the likely need for different levels of reliability in different places but acknowledged that state-wide, regional or national reserve margins is a problem.

The experience of four years ago with the shutdown of the District of Columbia, including the Secretary of Energy’s call for industry change to avoid such events in the future for the nation’s capital, was cited by one member (Dragoumis) as an example of an action that easily might have required physical changes to the electric system outside the District. This was posed as a clear question of oversight responsibilities and a need for proper incentives.

6.0 Task Force Work Plan Development

In response to the Chairman’s request for specific suggestions of issues to be considered by the Task Force, the members identified and discussed the following:

-Vikram Budhraja noted that, while the system is comprised of generation, transmission and distribution components, 80-90% of the disruptions take place on distribution systems but 70-90% of the expenses are directed to the transmission system. He said that problems on the interconnected grid are simply unacceptable but acknowledged that those issues involve jurisdictional questions.

-Rich Sedano said he believed that generation may need to be parsed into the ancillary services expected with that generation.

-Earl Nye urged the Task Force not to ignore either distribution or generation but to focus instead on the integrated, interconnected grid. He expressed his belief that the market will provide…over time but that, unfortunately this is an instantaneous business. No one expects 100% reliable power everywhere all the time.

-Jose Delgado noted that there is a definite time dimension to the issue of reliability and questioned whether an ISO will have to balance generation and load…instantaneously. Load management, he thought, will be done as a result of market decisions.

-In response to a question by Mark Bonsall as to whether the ISO will be able to accomplish the load/generation balances, Vikram Budhraja stressed that a system cannot be run without doing that. The real question, he thought, involves both who will pay for the service and the consequences when the ISO does have to take action to balance the system.

-Theresa Flaim questioned whether a scoping document was needed to focus the deliberations, possibly grounded in the physical system, possibly on the basis of time. She felt the need to do a basic scoping before attempting to address issues like “what legislation is needed.” She suggested an initial attempt to define the dimensions of reliability.

-Matthew Holden questioned the group’s assumptions regarding the composition of the electric system 10 or 20 years out. That is, whether we expect to be operating under a new gee-whiz electric system, better but in many ways similar to the present system, or that we don’t know what the system of the future will look like.

-In addition to the components of generation, transmission, and distribution, Jose Delgado advised the group not to lose sight of load and institutional issues as possible factors of reliability.

-Alden Meyer suggested the use of scenario analysis to better frame the issues. He thought it would be extremely helpful to be able to advise policy-makers on the likely consequences to reliability of moves in one direction or another.

-Vikram Budhraja cautioned against the use of structural models (e.g., California, Niagara) citing a fundamental change in paradigms. Under the present system, customers have no choice. In the new environment, customers do have a choice. That is a fundamental and powerful distinction. He thought that producers will have more freedom to enter and leave the marketplace and that the electric grid is a unified network; it does not recognize individual ownership.

There being no further comments by the Task Force, the Chairman briefly summarized the accomplishments of the meeting, thanked the members for their attendance and active participation, and adjourned the meeting.

Update — DOE Task Force on Electric Reliability; new EIA report

Subject: UFTO Note: Update — DOE Task Force on Electric Reliability; new EIA report
Date: Fri, 07 Feb 1997 13:00:12 -0800
From: Ed Beardsworth <edbeards@ufto.com>

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

Update — DOE Task Force on Electric Reliability; new EIA report

The minutes of the January 16 meeting should be made available soon, pending final OK by the task force chairman, Phil Sharp. They will be available on-line–I’ll let you know as soon as I hear from DOE.

Meanwhile, DOE staff are preparing some briefing papers for the Task Force members, and also plan to provide them with copies of a new report from the Energy Information Administration:

“The Changing Structure of the Electric Power Industry: An Update”, DOE/EIA-0562 (96), provides a good summary of the issues at stake and a history of the electric power industry.

It is available through the EIA at (202) 586-8800 (free to “energy producers”, but not to consultants!) or on their web site (http:// www.eia.doe.gov). You can download the complete report (2.5 MB in pdf-Acrobat format), and a summary is available at:

http://www.eia.doe.gov/cneaf/electricity/pub_summaries/eu_stru1_sum/contents.html#N_1_

Here are the first couple of paragraphs of that summary:

——————————-
The Changing Structure of the Electric Power Industry: An Update

Electric utilities(1)–one of the largest remaining regulated industries in the United States–are in the process of transition to a competitive market. Traditionally vertically integrated,(2) the industry will in all probability be segmented at least functionally into its three component parts: generation, transmission, and distribution. The proposals and issues are being addressed in Federal and State legislation and are being debated in State regulatory hearings. (View a discription of utilities and nonutilities in the current market structure.)

Change is occurring through the issuance by the Federal Energy Regulatory Commission (FERC) of Orders 888 and 889 (dated April 24, 1996) to encourage wholesale competition. Order 888 addresses the issues of open access to the transmission network and stranded costs. Order 889 requires utilities to establish electronic systems to share information about available transmission capacity. In addition, as of June 30, 1996, 44 States and the District of Columbia (more than 88 percent of the Nation’s regulatory commissions) have started activities related to retail competition in one form or another.(3) Issues such as recovery of stranded costs, divestiture of transmission assets, increased mergers, renewable energy incentives, energy efficiency investments, reliability, and the timing of retail competition are critical due to the degree of importance electricity holds in this country’s economic and social well-being. Legislative proposals on electric power restructuring have been introduced into the U.S. House of Representatives and the U.S. Senate.

DOE 2nd Industrial Energy Efficiency Symposium & Expo

Subject: DOE 2nd Industrial Energy Efficiency Symposium & Expo
Date: Fri, 24 Jan 1997 11:46:46 -0800
From: Ed Beardsworth <edbeards@ufto.com>

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

The DOE Office of Industrial Technology is holding its 2nd annual symposium in February in Washington DC. A program summary is shown below, taken directly from the OIT web site. This event looks like it could be valuable for your Industrial Customer folks.

Additional details can be gotten on line, or contact Energetics Inc, Columbia MD, 410-290-0370, fax 301-621-3329, and ask them to send you a copy of the full program brochure.

*************************************************
http://www.oit.doe.gov/News/expo97.html

2nd Industrial Energy Efficiency Symposium & Expo
SPONSORED BY THE OFFICE OF INDUSTRIAL TECHNOLOGIES
U.S. DEPARTMENT OF ENERGY

February 25-27, 1997 Hyatt Regency Crystal City Arlington, Virginia

The two-day conference will spotlight the public-private R&D; partnerships that are in place in seven key process industries: aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel.

This year’s theme, Turning Industry Visions Into Reality, strikes a chord with all technology and business managers. Today, more than ever, companies are looking to leverage every dollar by teaming up with other organizations and sharing technology risks. The 2nd Industrial Energy Efficiency Symposium and Exposition will bring manufacturers, suppliers, and customers together with key representatives of research laboratories, universities, and government programs to facilitate networking and the formation of research and technology alliances.

Find out how these industries will be gaining a competitive edge in rapidly changing global markets.

See how the industries of the future will meet the energy, environmental, and economic challenges of tomorrow.

Learn how collaborative R&D; addresses industry needs and accelerates the development of crosscutting technologies such as advanced turbines, textiles, advanced materials and composites, forging, heat treating, and welding.

Visit the exhibition hall, where exhibitors will showcase their technologies, products, and services.

(These headings are links in the web page) Invitation Background Information Exhibition Information Conference Schedule Post-Expo Workshops and Activities Sponsors Registration and Arrangements

Next Generation Wind Turbine

Subject: UFTO Note – Next Generation Wind Turbine
Date: Thu, 12 Dec 1996 17:03:33 -0800
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| NOTE NEW EMAIL ADDRESS: edbeards@ufto.com
————————————————————–

This Summary was prepared for UFTO by the Wind Turbine Company. Complete details on their business plan and technical approach are available from the company. The company is seeking business partners and equity investment capital.

——————————————–

THE WIND TURBINE COMPANY December 12, 1996

WTC’s 2-blade, downwind turbine design holds the promise of reducing the cost of wind generated electricity from its current level of 5¢/kWh to less than 3.5¢/kWh without resorting to available subsidies. WTC has significantly refined and improved upon the downwind design, incorporating proprietary technology, in a quest to reduce the initial turbine cost, the primary cost driver of wind energy, without sacrificing reliability. WTC’s turbine will weigh 60% as much as a comparably rated 3-blade, upwind turbine. Its lighter weight will permit WTC’s turbine to operate higher above ground (100 meters or more) than is economic for upwind turbines, thus exposing it to higher winds resulting in more energy production. Lower weight and higher energy capture combine to provide a substantial reduction in the cost of wind generated electricity.

WTC was selected by the Department of Energy’s National Renewable Energy Laboratory (DOE and NREL) to participate in Stage 2 (the hardware building stage) of the “Next Generation Turbine Development Project.” This is a $20 million project with the DOE picking up 70% of the cost. It will last 5-6 years. Two commercial wind turbines, the WTC 250 and WTC 1000, will be developed. As the result of its cost sharing, WTC will own all hardware produced.

A contract with NREL permitting work to begin on this project is expected by the end of December, 1996. To begin work, WTC needs to obtain initial funding for its share of the cost. WTC has identified two outside sources of funding and would like to identify one or two additional sources, one of which is ideally a strategic partner that can help commercialize the wind turbines when they are available.

The project will be executed in three phases corresponding to the development of three wind turbines:

In the “proof-of-concept” (POC) phase, WTC will manufacture and begin testing the POC 250, a 250 kW turbine. This turbine will demonstrate the technology that is novel to WTC’s design-WTC’s proprietary, hydraulically operated system in the turbine’s rotor that permits the cone angle between the blades to adjust depending on wind speed. Building the POC 250 will take approximately 12 months with an extended testing period to follow.

In the second phase WTC will develop the first full-scale 1000 kW turbine. This phase will begin in the second quarter 1998. During this phase, WTC will also develop an all new wind turbine blade for the 1000 kW turbine.

Concurrently, and independent of the NREL contract, WTC will refine the POC turbine with the intention of having the WTC 250 commercially available in early 1999.

3. The second full-scale turbine, the WTC 1000 production prototype, will be manufactured in the third phase. This turbine will be a commercial product.

To execute the project, commercializing the WTC 250 in parallel, WTC will have to raise approximately $12 million in equity funding over the next 5-6 years before reaching a break-even cash flow. This fund raising occurs in stages corresponding to the turbine development phases. Presently, WTC is raising $2 million by selling equity representing approximately 40% ownership of the Company. This will permit execution of the POC phase.

One of WTC’s current shareholders will participate in this financing, and WTC also expects a newly formed, electric utility-funded venture capital company to participate. Together these investors will account for a minimum of $1 million of the required initial funding, and could easily account for more. Both would like WTC to identify a strategic partner.

Markets for the WTC 250 and WTC 1000

The opportunity for the WTC 250 is in developing countries and in installations that are not grid connected. For example, the standard WTC 250 would be ideally suited for islands in the Caribbean, the Azores, etc., as well as mainland-based installations in Latin America and Asia. Primary considerations for this turbine are climates where fully weather protected maintenance is not critical, and where existing infrastructure such as roads, as well as the unavailability of large-size erection equipment, prohibit the installation of large wind turbines.

Many such installations are currently served by diesel generation units or are candidates for such units. Even in locations where diesel fuel is low cost, integrated wind/diesel systems will emit less pollutants and therefore should be viewed favorably by customers.

One modification to the WTC 250 which has been considered is the development of a cold weather version. Though the market for this wind turbine is a subset of the market for stand-alone systems, it is a high value opportunity. In many remote, cold weather locations, the cost of delivering diesel fuel is high.

WTC believes it can sell a limited number (20+/-) WTC 250 wind turbines in early 1999, generating its first revenue from commercial sales. Specific customers for these turbines have not been identified, however, a number of opportunities exist including the DOE/Electric Power Research Institute sponsored Turbine Verification Program. The US military is also known to be considering use of renewable energy technologies.

The opportunity for the WTC 1000 is large scale, grid connected applications. At present, and for perhaps the next 5-10 years, this market will be primarily in North America and “off-shore” in Europe. If the WTC 1000 achieves its cost and energy production targets, it will be competitive in the deregulated North American marketplace. Initially, it will displace higher cost sources of electricity from the grid when the wind is blowing. Storage technologies will eventually improve to the point where wind energy will become a major contributor in the North American electricity system.

During the next 3-5 years, however, there will be limited opportunities for new wind energy projects in North America as the generation industry deregulates and excess capacity is absorbed. This is the period during which WTC will be developing its new technology. By the time the WTC 1000 is available for commercial sale in the year 2000, the US market for low-cost wind energy will be rebounding.

The immediate opportunity for wind energy will be presented by the closure of aging nuclear power facilities. WTC believes the public will not accept a lessening of air quality as the price for a more competitive electricity market. Thus, in spite of an abundance of coal in North America, natural gas will to continue to be the fuel of choice. If the WTC 1000 achieves its cost objectives, electricity generators will turn their gas turbines off when the wind is blowing.

For more information please contact:

Larry Miles, President
The Wind Turbine Company
515 – 116th Avenue NE, Suite 263
Bellevue, WA 98004 USA
telephone: (206)637-1470
facsimile: (206)637-1483
email: MilesLW@MSN.com

3rd DOE Public Meeting on Elec. Industry Restructuring

Subject: UFTO Note –3rd DOE Public Meeting on Elec. Industry Restructuring
Date: Mon, 04 Nov 1996 09:25:36 -0800
From: Ed Beardsworth

————————————————————–
| *** UFTO *** Edward Beardsworth * Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
————————————————————–

A letter went out last Friday from the DOE Office of Policy inviting participation in the 3rd regional public meeting on electric industry restructuring. (See UFTO Note, Oct. 17)

It will be held in Chicago on November 15, 1-5 pm at the Downtown Marriott. It will begin with a “town meeting”, then panelists, then Q&A.

Questions are being handled by a hotline at 423-576-3610. I just called them and they are very helpful. They can provide additional information, including summaries of the first two meetings and guidance on how to become a panelist.

DOE Reliability TF members named

Subject: UFTO Note — DOE Reliability TF members named
Date: Wed, 04 Dec 1996 13:29:02 -0800
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
————————————————————–

The full roster of members of the Task Force has just been released. See below. First meeting tentatively set for January 16. Purpose to set a long term research agenda! Will undertake specific projects in the short term. (See UFTO note Oct 23 for background).

I’ve established contact in the DOE Office of Policy with the newly appointed Staff Director for the new SEAB Task Force on Electric Reliability. His name is Paul Carrier.

I’ve already referred him to several people in the National Labs so the TF can draw upon that expertise. If you have experts in your company or elsewhere that you’d like to suggest as technical resources for the TF, now is the time. (It’s expected that panel members will be likely to provide some staff time from their companies.) Paul would be glad to hear about them. Let me know.
_______________________________________________

PS–The last of four public input meetings will be in Atlanta on Thursday December 12, 1:00 to 5:00 pm at the Hilton Towers. For information, the hot line # is 423-576-3610.

For full transcripts of the first three meetings, go to
http://webdev.doe.gov/transcripts

1996 Fuel Cell Seminar & Russian Amer. Consortium

Subject: UFTO Note — 1996 Fuel Cell Seminar & Russian Amer. Consortium
Date: Fri, 01 Nov 1996 13:21:39 -0800
From: Ed Beardsworth <edbeards@batnet.com>

————————————————————–
| * UFTO * Edward Beardsworth * Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
————————————————————–

The 1996 Fuel Cell Seminar is coming up next month, Nov 17-20.

——————————————

Fuel Cells — The Dawn of Commercialization
DATE: November 17-20, 1996
Kissimmee, Florida

For information, please contact:
Ms. Annmarie Pittman
655 15th Street, NW
Suite #300
Washingtion, D.C. 20005
Phone: (202) 639-4994
Fax: (202) 347-6109
EMail: 96FCSEM@mcimail.com
——————————————

On Tuesday Nov 19, there will be a special briefing about the RUSSIAN AMERICAN FUEL CELL CONSORTIUM (RAFCO). See earlier press release below.

*** UFTO members received copies of the proceedings of the US Russian workshop held in Sept. 1995 (SAND96-0945) Our contact at Sandia, Al Sylwester, is directly involved in RAFCO, and tells me he’d welcome utility involvement. ***
——————————————
DOE PRESS RELEASE September 17, 1996

United States and Russia To Co-Develop Clean, Efficient Fuel Cell Technologies

The United States and Russia today announced they will pool their resources on the research and development of fuel cells, a move that is expected to help speed this highly efficient, clean energy source to commercial markets. The Russian-American Fuel Cell Consortium (RAFCO) will draw on the scientific and engineering expertise of both nations to advance the development of commercially viable fuel cell technologies and promote defense conversion goals. American industry is expected to play a pivotal role in the consortium’s projects.

U.S. Secretary of Energy Hazel R. O’Leary and Russian Minister of Atomic Energy Viktor Mikhailov signed the agreement while attending meetings of the International Atomic Energy Agency in Vienna, Austria. “This is another milestone in Russian-American cooperation and a concrete step in the Clinton administration’s commitment to diversify the world’s energy supply with clean, efficient alternative technologies,” Secretary O’Leary said.

Fuel cells are a highly energy-efficient, environmentally friendly and cost-effective power source. Originally developed by both countries for their space programs, they convert the energy released by oxidation of a fuel directly into electricity. By producing energy without combustion, they release much less carbon dioxide than conventional technologies.

Fuel cell technology is a national priority in Russia as a source of remote power for the rapidly developing oil and gas industry. In the United States, the Department of Energy supports research and development in fuel cells for power and transportation applications, including the enhanced use of natural gas, utility and other power grid applications, retail and industrial dispersed power applications, mass transportation and advanced automobile technologies. Pooling the resources of the two governments and American industry is expected to result in significant cost savings.

There is already a small, emerging U.S. and international market for fuel cell applications. International Fuel Cells, a leader in the field, is currently producing the 100th 200-kilowatt power plant using phosphoric acid fuel cell technology, which was developed largely with DOE support.

DOE’s Sandia National Laboratories first proposed a consortium in 1994 as an efficient way of combining the expertise and resources of Russian nuclear institutes, DOE national laboratories and U.S. industry. RAFCO will combine Russian and American scientists and engineers on specific projects and serve as an information clearing house. The consortium will further nonproliferation goals by helping to redirect the expertise in Russian and U.S. nuclear labs to peaceful applications.

The initial collaborations will include work on all four types of fuel cell technologies: solid oxide, molten carbonate, phosphoric acid, and polymer electrolyte membrane fuel cells. -DOE- R-96-137