E-Beam Water Mist for Fire Fighting

Subject: UFTO NOTE — E-Beam Water Mist for Fire Fighting
Date: Mon, 17 Mar 1997
From: Ed Beardsworth <edbeards@ufto.com>

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

E-Beam Water Mist for Fire Fighting–Possible Halon Replacement

Misting sprays have been shown to be particularly effective in quenching fires. Considerably less water is required to put out a fire when it is in mist form as opposed to the larger droplet sprays generated by typical sprinkler nozzles. While effective in suppressing fires with little water damage, mist nozzles suffer from an inability to convey droplets to cloistered areas where all to often fires can take hold. This failing is shared by all uncharged sprays, whose droplets follow ballistic or aerodynamically influenced trajectories.

This is not true of charged sprays. Charged droplet trajectories are controlled by mutually induced electrical forces that automatically drive them to grounded surfaces no matter how distant these surfaces are from the nozzle. These forces literally force charged spray droplets to wrap around grounded objects in their path. For instance, charged spray droplets will flow to a fire under a bench that would not be contacted by uncharged droplets. In addition, since flames are grounded and conductive, they are attractive to charged droplet sprays, which will preferentially flow toward them.

Such a technique could potentially provide a replacement for Halon, which is being phased out as a greenhouse gas.

Charged Injection Corporation (CIC) is currently working under Navy sponsorship on the development of an electrostatic nozzle for dispersal of fire fighting water mists. CIC has developed a number of nozzles that are capable of providing high flow rate charged sprays. The Plasma Physics Lab at Princeton is working closely with CIC, providing important modeling and theoretical support.

All of CIC’s nozzles involve the same concept, the driving of free charge (electrons) into a passing fluid. Once charged, the fluid predictably atomizes and self-disperses. Non-conductive fluids, such “clean extinguishing agents” of the type produced by 3-M, and fuels and oils, are easily charge-injected by simply immersing an electrode in the fluid upstream of an orifice. These SPRAY TRIODE atomizers are compact, require very low power for operation, and can be operated at arbitrarily high flow rates.

While SPRAY TRIODE devices will short out when used with water, charge injection can be obtained by a second means. CIC is under Navy contract to develop an electrostatic water mist nozzle using an electron gun to drive charge directly into water streams. This patented technology uses a peanut sized electron gun as the source (the SPRAYTRON is similar to what’s in a TV picture tube). The electrons pass through a thin window to the exterior.

This technique opens the way to the development of nozzles that are capable of operating at any flow rate of interest. Most importantly, since droplet size is solely a function of the amount of charge imparted to the fluid, the SPRAYTRON source permits direct electronic control of spray droplet size.

Many other applications are also possible with CIC’s devices, such as dispersing insecticides or herbicides, spray coating and painting, fuel injection, drug delivery, desalination, and even size separation of microparticles.

Contact: Dr. Arnold. J. Kelly, Chief Engineer.
Charged Injection Corporation
Monmouth Junction, NJ 08852
(908) 274-1470, fax (908) 274-1454, spraytron@aol.com

Waste Tire Gasification

Subject: UFTO Note–Waste Tire Gasification
Date: Sat, 15 Mar 1997
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

Waste Tire Gasification

Waste Gasification Technology, Inc (WGTI) is a startup company with a technology to convert waste tires into oil and gas fuels, while producing no smoke, pollution or odor, and leaving only a small amount of solid residue. The fuels can be used to generate steam and/or electricity, or to provide heat for industrial users (e.g. fruit drying or plywood manufacture).

The process is called “air gasification” and differs significantly from other means used to dispose of tires, such as direct combustion (cofiring with coal, fluid bed, etc.) or pyrolysis. In effect, it reverses the process by which rubber is obtained from petroleum through a series of six chemical reactions including controlled combustion.

A typical 3-ton per hour plant (approx. 2.2 million tires/year) would produce 0.5 MMBTU of gas similar to propane, and 0.3 MMBTU of medium grade oil suitable for heating or electric power generation. 15% of these fuels would be used for the process itself, and the balance could then be sold to nearby industrial users, or supply supplemental fuel to an electric power or steam plant (sufficient for 10 MW or 100,000 lb/hour steam).

The process was extensively tested under field conditions in a 1/3 size prototype plant (100 tires/hour) several years ago in Oregon. Oregon’s Department of Environmental Quality supervised air quality and environmental monitoring of the plant, which showed little or no evidence of sulfur emissions. (Due to lower temperatures of the process, the sulfur tends to stay with the char rather than forming SOx.) This program was interrupted by the untimely death of the inventor in 1992. Ownership of the patent and other assets have only recently emerged from probate.

As new owners of the rights to the process, WGTI is now prepared to move forward, first with a re-installation of the prototype plant near a major tire pile in Tulare County in Southern California. Upon success of this program, including certification by the various environmental authorities, full size plants would be established at various sites in California and elsewhere. Investment capital is needed for these efforts. Technical details and business plans are available.

Contact:

Robert H. Enslow San Francisco, CA
415-775-7020, fax 415-775-7028, enslow_rh@msn.com

Bruce S. Owen San Francisco, CA
415-567-8600, fax 415-346-2444

2nd National Green Pricing/Power Conf

Subject: UFTO Note – 2nd National Green Pricing/Power Conf
Date: Fri, 14 Mar 1997 09:25:57 +0000
From: Ed Beardsworth
————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

DOE, EEI, EPRI, and host C & SW will hold the “Second National Green Pricing and Green Power Marketing Conference” on May 13-14, 1997, in Corpus Christi, Texas.

Agenda will include updates on existing programs, an overview of new Green Power projects, lessons learned about Green Power and retail wheeling, and perspectives on issues such as certification and disclosure.

Discounted registration fee if paid before April 15, and for members of the EPRI Renewables Target.

For registration/information, contact: Lorie Adams, EPRI coordinator, 415-855-8763, fax 415-855-8501. (EPRI has published an “Events” sheet for this.)

Also, a complete description of the program and online registration will be available beginning tomorrow at the DOE/EREN Green Power web site, either as a separate button “Second DOE/EPRI green pricing & power marketing conference” or in the “What’s New” botton, under “upcoming events” :

http://www.eren.doe.gov/greenpower/

A summary of last year’s conference appears there, along with a number of other useful resources on Green Power.

2nd Elec Task Force Meeting Announced

Subject: UFTO Note – 2nd Elec Task Force Meeting Announced
Date: Mon, 10 Mar 1997 14:34:52 +0000
From: Ed Beardsworth

(advance notice just received from DOE–to appear in Fed Register)

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–
[6450-01-P]
DEPARTMENT OF ENERGY
Secretary of Energy Advisory Board
Notice of Open Meeting
AGENCY: Department of Energy
SUMMARY: Consistent with the provisions of the Federal Advisory Committee Act (Public Law 92-463, 86 Stat. 770), notice is hereby given of the following advisory committee meeting:

Name: Secretary of Energy Advisory Board – Electric System Reliability Task Force
Dates and Times: Tuesday, March 25, 1997, 8:00 AM – 4:00 PM
Place: The Madison Hotel, Dolley Madison Ballroom
15th and M Streets, NW Washington, D.C. 20005

FOR FURTHER INFORMATION CONTACT:
Richard C. Burrow, Secretary of Energy Advisory Board (AB-1),
U.S. Department of Energy, 1000 Independence Avenue, SW, Washington, DC 20585,
(202) 586-1709 or (202) 586-6279 (fax).

SUPPLEMENTARY INFORMATION:
Background
The electric power industry is in the midst of a complex transition to competition, which will induce many far-reaching changes in the structure of the industry and the institutions which regulate it. This transition raises many reliability issues, as new entities emerge in the power markets and as generation becomes less integrated with transmission.

Purpose of the Task Force

The purpose of the Electric System Reliability Task Force is to provide advice and recommendations to the Secretary of Energy Advisory Board regarding the critical institutional, technical, and policy issues that need to be addressed in order to maintain the reliability of the nation’s bulk electric system in the context of a more competitive industry.

Tentative Agenda

8:00 – 8:15 Opening Remarks & Objectives
Philip Sharp, Chairman, Electric System Reliability Task Force
8:15 – 9:15 Discussion: Assumptions Regarding the Future Electricity
Industry
9:15 – 10:15 Discussion: Basic Concepts and Operating Requirements for Electric System Reliability
10:15 – 10:30 Break
10:30 – 11:45 Panel Discussion & Roundtable: Policy and Institutional Issues,
Panelists: NERC, Power Marketer, & DOE
11:45 – 12:00 Public Comment
12:00 – 1:15 Lunch
1:15 – 3:45 Panel Discussion & Roundtable: Policy and Institutional Issues (Continued),
Panelists: NERC, Power Marketer, & DOE
3:45 – 4:00 Scheduling of Next Meeting
4:00 Adjourn

This tentative agenda is subject to change. The final agenda will be available at the meeting.

Public Participation
The Chairman of the Task Force is empowered to conduct the meeting in a fashion that will, in the Chairman’s judgment, facilitate the orderly conduct of business. During its meeting in Washington, D.C. the Task Force welcomes public comment. Members of the public will be heard in the order in which they sign up at the beginning of the meeting. The Task Force will make every effort to hear the views of all interested parties. Written comments may be submitted to David Cheney, Acting Executive Director, Secretary of Energy Advisory Board, AB-1, 1000 Independence Avenue, SW, Washington, DC 20585.

Minutes

Minutes and a transcript of the meeting will be available for public review and copying approximately 30 days following the meeting at the Freedom of Information Public Reading Room, 1E-190 Forrestal Building, 1000 Independence Avenue, SW, Washington, DC, between 9:00 AM and 4:00 PM, Monday through Friday except Federal holidays.

Issued at Washington, DC, on
Rachel Samuel Acting Deputy Advisory Committee Management Officer

Capacitive Deionization licensed

Subject: UFTO Note — Capacitive Deionization licensed
Date: Thu, 06 Mar 1997
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

Livermore has given a license for CDI to a small water company in Tucson, AZ who’ve formed a subsidiary, Terra Research Corp., to pursue applications. The parent company is publicly traded OTC – Far West Group, which does water drilling and pumping and supplies.

They are looking for partners and investment capital. I have a summary of their business plan they sent me, which I can provide by email, snail mail or fax.

Let me know if you want a copy, and if you’d like to talk to them.

————————————–
Here is the UFTO writeup about CDI, when Livermore first announced it:

> January 1995
>
> Desalination and Waste Water Treatment by Capacitive Deionization (CDI)
>
> On December 20, 1994, LLNL announced a new way to deionize water. The
> huge effective surface area of carbon aerogels makes feasible the
> straightforward and well known process of capacitive deionization.
> Water containing salts, heavy metals or even radioactive isotopes flows
> through a series of electrochemical cells. An electric potential is
> applied across the electrodes, which attract the charged ions.
>
> The electrodes are metal plates coated with the aerogel, the high
> surface area of which allows them to absorb large quantities of ions,
> which are released later into a small volume “rinse” stream. CDI offers
> significant benefits over traditional deionization processes, such as
> reverse osmosis, ion exchange or evaporation. These involve high energy
> use, reliance on acids and bases, production of corrosive secondary
> wastes, and use of troublesome membranes. Compared with traditional
> desalination techniques, CDI could reduce the energy requirement by as
> much as 100-1000 times.
>
> Potential applications include: treatment of boiler water in power
> plants, electric residential water softeners, desalination of sea water,
> waste water treatment (i.e. volume reduction, notably of radioactive
> wastewater, by a factor of 1000), and more.
>
> A desktop test unit has been operating at LLNL for some time. A patent
> was filed in May 1994. Aerojet may become a supplier of the aerogel
> material, based on its experience with silicon aerogels.

DOE Electric Reliability TF Meeting Minutes

Subject: UFTO Note – DOE Electric Reliability TF Meeting Minutes
Date: Thu, 27 Feb 1997 09:16:14 -0800
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

Attached are the approved minutes of the first meeting of the Electric System Reliability Task Force. The minutes were approved by Chairman Phil Sharp on February 24, 1997.

=====================================
NEXT MEETING:
The second meeting of the Task Force will be held in Washington DC on March 25th at the Madison Hotel. The meeting will tentatively start at 8:00 AM and last until 4:00 PM.

The meeting will tentatively include:

1) A discussion of “Assumptions Regarding the Future Electricity Industry”, based on a paper by Theresa Flaim entitled “A Vision of the Competitive Electricity Market – What’s Clear, What Isn’t”.

2) A discussion of the “Basic Concepts and Operating Requirements for Electric System Reliability”, based on a staff paper.

3) A discussion of “Policy and Institutional Issues”, where staff from NERC, DOE and a Power Marketer will present their views on how policy and institutional reliability issues should be addressed.

4) Planning and Scheduling of Future Meetings.

A Federal Register Notice will be published at least 2 weeks before the meeting. It will include the agenda and principal speakers.

========================================================

Secretary of Energy Advisory Board Task Force on Electric System Reliability Minutes of First Task Force Meeting January 16, 1997

J.W. Marriott Hotel Washington, D.C.

1.0 Opening Remarks and Perspectives

The first meeting of the Secretary’s Task Force on Electric System Reliability was held on January 16, 1997, in the J.W. Marriott hotel, Washington, D.C. Robert Hanfling, Chairman, Secretary of Energy Advisory Board (SEAB) opened the meeting at 8:30 am with a brief welcome to the members and an introduction of the Task Force Chairman, Philip Sharp (the Chairman).

The Chairman thanked the members for agreeing to participate on the Task Force and expressed his respect for the work they do in “keeping the lights on.” He recalled the major electrical outages in the West last summer as painful reminders of what happens when the lights do go out. He called attention to the great changes taking place now in the electric power industry (e.g., participants, demands, economic incentives) and stressed that one of the main goals of this Task Force was to make sure that reliability did not get lost in the transition. He then introduced Deputy Secretary of Energy Charles B. Curtis.

Deputy Secretary Curtis thanked the members for interrupting busy schedules and expressed his hope that the work of this panel will be useful for present and future generations. He observed that the industry is irreversibly committed to restructuring and stressed the need to assure that reliability is afforded its proper place for consideration in the evolving change. He commented that with the continued economic growth and development in our country, blackouts are debilitating to our economy and becoming even more so. The Deputy Secretary offered seven specific challenges to the Task Force:

-Although the bulk electric power system has functioned well under a sense of voluntarism, thanks largely to the North American Electric Reliability Council (NERC) and its regional councils, will voluntarism be sufficient to assure reliability under the new paradigm?

-Are federal authorities adequate and are they properly lodged in the right agencies (e.g., DOE, FERC)?

-Given the advances which have taken place in industry technology, operational procedures and training, which permit the system to be operated closer to the margins, are we asking operators to do more than is reliably possible?

-Given the evolving changes in economic incentives which underpin the industry, is the industry likely to continue to invest wisely and adequately in R&D?

-Given that the concept of an independent system operator, in one form or another, is under strong consideration in many states, is that concept necessary and sufficient for maintaining a secure and reliable system?

-Is the balance between federal/state regulations proper, and is it possible that the states could do more to assure reliability?

-Given that the 105th Congress intends to focus sharply on electricity restructuring during this session and that the Administration will likely submit legislation this year, what are the recommendations of this Task Force?

2.0 Task Force Member Introductions

Following these remarks, the Chairman asked each of the 18 present and three telecommunicating members of the Task Force to introduce themselves, briefly describe their background and describe any areas in which they felt their expertise might be especially helpful to the group.

3.0 Institutional Reliability Issues

The Chairman then introduced Mr. Michehl Gent, President, North American Electric Reliability Council (NERC), to discuss institutional reliability issues. Mr. Gent briefly described the three interconnections and noted that the regions, now numbered at ten, initially were formed by the people in each region to address the unique needs of that region. There was no intent then to make them similar since there was no thought of sending power from Minneapolis to Florida. As a result of changes, both those which have taken place already and those anticipated, the regions are becoming more alike in terms of their electric power planning and operations. He recalled events leading to the formation of NERC in 1968 after the northeast blackout of Nov. 9, 1965, and described its three primary objectives; to establish standards, measure performance, and ensure compliance. Of special note, he thought, were actions taken by NERC to adapt to evolving changes in ownership and access. By way of example, he noted that membership on the Board of Trustees had increased to 34 with representation by all segments of the industry, and also that the number of organizations with observer status had increased. Mr. Gent then introduced Don Benjamin, NERC’s Director of Operations, to discuss some of the specific activities underway within the industry to assure reliable operations in the new environment.

Mr. Benjamin highlighted a number of current initiatives, in areas of: operational security; transmission use; operating standards, interconnected operations services; and, actions to address major outages in the West last summer. He concluded with a summary statement of goals for a reliable electric system which can accommodate the marketplace by:

-operators having the “big picture” at all times; -analyzing transactions before they are consummated; -ensuring compliance with NERC policies; -establishing a program of system operator certification; and, -defining requirements for interconnected operations services.

Mr. Benjamin described in some detail NERC’s previous approach to operational security in which interconnected but nearly autonomous systems have operated through about 150 control areas established so as to be able to operate so that problems are contained within the area and do not pass beyond the boundaries. He indicated that goal is becoming more difficult to achieve on a control area basis with the increased role of market entities and open access. To supplement the control centers, the industry is moving toward security coordinators, fewer in number at twenty-two, with responsibilities to perform security analysis based on interchange schedules, coordinate emergency operations (e.g., transmission overload relief, load reductions), manage the interregional security network, and develop operating policies as may be needed. In terms of status, he advised that regional security plans are in place, coordinators exist and will have their first meeting in February, and that necessary databases are known and in preparation.

In response to a question (Cavanagh) of whether the new security system can handle tens of thousands of transactions/hour, Mr. Benjamin noted that: “We’ll have to. We probably can’t today…but we’re closer today than we were 5 years ago. With computer technology…it should be possible. Multi-regional models handle the flows and will be updated continuously. They will be able to reflect, ideally, what is really happening in the system.” Mr. Budhraja stressed the big difference between physical and financial transaction systems noting that the number of generators and points of consumption will not change, while financial transactions can number in the thousands.

The Chairman asked the status of the models NERC uses to monitor security and was informed by Mr. Benjamin that they have existed and been kept current for years. What is not in place yet is the ability of the operators to access those models in real-time. That capability is undergoing development right now. Once real-time access is possible by all operators, they can test a transaction real-time and, if it is feasible, conclude it.

4.0 Technical Reliability Issues

The Chairman then introduced Dr. Karl Stahlkopf, Vice President, Power Delivery, Electric Power Research Institute (EPRI), to discuss technical reliability issues. After a brief review of differences between design objectives for the system and the way it is being operated today, Dr. Stahlkopf moved on to discuss the causes of and lessons from last year’s major outages in the West.

After a brief background review of the record heat and unusual power flows which preceded the August 10 outage, Dr. Stahlkopf described its chronology. He then summarized the basic causes of the outage as follows:

-systems were stressed; -not enough reactive support/control in the area; -initiating conditions not studied before; -operators did not know system was insecure; -no one had the “big picture”; and, -reliability impact of maintenance not understood.

As far as lessons learned, Dr. Stahlkopf said he did not believe restructuring was a factor in the outage; rather, the system simply was stressed due to hot weather. On the other hand, he did believe that financial incentives were a factor (i.e., cheap hydro-power in Northwest); they caused flow patterns which were unusual for that time of year and, coincidently, had not been studied. Regarding lack of reactive support in the Western System Coordinating Council (WSCC) at that time, Dr. Stahlkopf noted ongoing studies by NERC and EPRI aimed at determining whether this is a chronic problem.

On the subject on maintenance impacts on reliability, Dr. Stahlkopf noted that BPA had increased their vegetation maintainance budget because of a wetter and hotter than normal growing season but questioned whether, in a competitive market, financial disincentives would exist to cause utilities to try and limit their expenditures on maintainance. Members of the Task Force agreed that this aspect must be addressed.

Dr. Stahlkopf moved on to a discussion of technology improvements that might help avoid such an occurrence in the future. He mentioned three major improvements as being Flow Actuated Control Thyristors (FACTS), Static Compensator (STATCOM), and Unified Power Flow Controller and summarized the likely contributions to reliability of each. One member of the Task Force (Budhraja) commented that all of these devices contribute to getting more out of the installed system and observed the obvious reliability implications. He questioned whether the industry should also be thinking about adding to transmission systems so they don’t have to be operated so close to their limit.

After brief discussions of the Wide Area Measuring System (WAMS), an operations data system, and several EPRI initiatives targeted on maintenance, Dr. Stahlkopf concluded that near-term technologies may improve reliability in four areas: operating tools; transmission system “agility”; monitoring and communications; and, reducing maintenance costs reliably.

5.0 State Reliability Issues

The subject of state reliability issues was addressed by the Honorable Duncan Kincheloe, Commissioner, Missouri Public Service Commission. Mr. Kincheloe said that, while states have historically engaged in regulating the power industry, can establish standards for voltage regulation, govern service priorities for restoration and curtailment, and can set standards for reserve margins, they now face prospects of diminished success in regulatory actions and need new mechanisms to look at reliability. In this regard, he suggested several areas which may warrant further consideration.

-in the area of generation and supply, he acknowledged that: past assurance of rate-based adjustments (by states) to cover investments in capacity may have undergirded utilities’ willingness to invest; and, whereas local distribution companies had responsibilities to restore service in past emergencies as a consequence of franchised territories, this may no longer apply in a competitive future.

-in the area of Federal regulation, he said: if Congress legislates retail competition, states must have authority to demand evidence of experience at providing service/reliability for new market entrants; and, if Congress legislates a (minimum) reliability standard, states would want the responsibility to assure compliance-according to historical roles- and the authority to tighten the standard, if desired.

He concluded with his opinion that states are very much in the transmission regulation business but have major concerns (with the Federal Energy Regulatory Commission (FERC)) with the issue of jurisdiction over unbundled retail power.

After the lunch break, the Chairman announced his intention to open the floor for public comment, followed by a return to member discussions on Mr. Kincheloe’s presentation.

During the public comment period, one observer rose to discuss the use of direct current on the bulk power system and noted that it is on the increase. His consulting company has been advising customers to “move away from the grid” toward more reliance on direct current and he hoped that the Task Force would consider this evolving trend in the industry.

There being no further comment by the public, the Chairman returned to discussions on Mr. Kincheloe’s presentation. During the discussion that followed, a question was raised (Holden) regarding the status of the federal/state transaction “debate. Mr. Kincheloe answered that FERC has asserted jurisdiction over certain unbundled components which heretofore had been within the purview of the states (e.g., retail transactions involving some component of the transmission system). Under the unbundling, FERC has now asserted jurisdiction.

In another area, a question was raised (Dragoumis) as to whether there have been any attempts to establish state compacts (i.e., agreements between two or more states) to set reliability rules and standards. The Chairman noted that states may propose to Congress the approval of compacts, and Congress usually approves them. The problem is that it is unlikely for states to propose compacts on very complex issues because it is so difficult for them to agree on the details.

One member (Meyer) questioned how states would be likely to handle suppliers who have, say, only one generator and whether they would require 100% reserve. While this was considered unlikely, it was also the case that the state probably wouldn’t want to impose very stringent requirements either because the suppliers would be likely to withdraw from doing business in their state….and that would affect the level of competition.

Another member (Flaim) stressed the likely need for different levels of reliability in different places but acknowledged that state-wide, regional or national reserve margins is a problem.

The experience of four years ago with the shutdown of the District of Columbia, including the Secretary of Energy’s call for industry change to avoid such events in the future for the nation’s capital, was cited by one member (Dragoumis) as an example of an action that easily might have required physical changes to the electric system outside the District. This was posed as a clear question of oversight responsibilities and a need for proper incentives.

6.0 Task Force Work Plan Development

In response to the Chairman’s request for specific suggestions of issues to be considered by the Task Force, the members identified and discussed the following:

-Vikram Budhraja noted that, while the system is comprised of generation, transmission and distribution components, 80-90% of the disruptions take place on distribution systems but 70-90% of the expenses are directed to the transmission system. He said that problems on the interconnected grid are simply unacceptable but acknowledged that those issues involve jurisdictional questions.

-Rich Sedano said he believed that generation may need to be parsed into the ancillary services expected with that generation.

-Earl Nye urged the Task Force not to ignore either distribution or generation but to focus instead on the integrated, interconnected grid. He expressed his belief that the market will provide…over time but that, unfortunately this is an instantaneous business. No one expects 100% reliable power everywhere all the time.

-Jose Delgado noted that there is a definite time dimension to the issue of reliability and questioned whether an ISO will have to balance generation and load…instantaneously. Load management, he thought, will be done as a result of market decisions.

-In response to a question by Mark Bonsall as to whether the ISO will be able to accomplish the load/generation balances, Vikram Budhraja stressed that a system cannot be run without doing that. The real question, he thought, involves both who will pay for the service and the consequences when the ISO does have to take action to balance the system.

-Theresa Flaim questioned whether a scoping document was needed to focus the deliberations, possibly grounded in the physical system, possibly on the basis of time. She felt the need to do a basic scoping before attempting to address issues like “what legislation is needed.” She suggested an initial attempt to define the dimensions of reliability.

-Matthew Holden questioned the group’s assumptions regarding the composition of the electric system 10 or 20 years out. That is, whether we expect to be operating under a new gee-whiz electric system, better but in many ways similar to the present system, or that we don’t know what the system of the future will look like.

-In addition to the components of generation, transmission, and distribution, Jose Delgado advised the group not to lose sight of load and institutional issues as possible factors of reliability.

-Alden Meyer suggested the use of scenario analysis to better frame the issues. He thought it would be extremely helpful to be able to advise policy-makers on the likely consequences to reliability of moves in one direction or another.

-Vikram Budhraja cautioned against the use of structural models (e.g., California, Niagara) citing a fundamental change in paradigms. Under the present system, customers have no choice. In the new environment, customers do have a choice. That is a fundamental and powerful distinction. He thought that producers will have more freedom to enter and leave the marketplace and that the electric grid is a unified network; it does not recognize individual ownership.

There being no further comments by the Task Force, the Chairman briefly summarized the accomplishments of the meeting, thanked the members for their attendance and active participation, and adjourned the meeting.

Dual Source Heat Pumps

Subject: UFTO Note – Dual Source Heat Pumps
Date: Thu, 20 Feb 1997 16:59:16 -0800
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

Dual Source Heat Pumps

New types of heat pumps are coming on the market. Dual Source heat pumps combine both ground-source (geothermal) and air-source, and promise significant cost and performance improvements over existing systems. (E-Source will issue a major report in the very near future entitled “Dual Source Heat Pumps, The Sleeping Giant”.) Note that is not the same thing as “dual-fuel”, which usually refers to gas/electric systems.

Compared with ground source, the dual source uses a smaller ground loop, which is easier and cheaper to install, especially in retrofit situations. It’s cold weather performance and overall efficiency is better than air source systems.

There are two basic types. One is “direct expansion”, where the refrigerant itself is circulated in the ground loop. The other uses a glycol solution in the ground loop.

—————————-
Geothermal Technologies, Inc. (GeoTech) offers the direct expansion type of system that circulates refrigerant through both ground loop and air coil. In the milder portion of the heating and cooling seasons when conventional heat pumps are still very efficient, the heat pump provides heating or cooling via the air coil. During extreme temperatures, the system relies entirely on the ground coil for heat exchange. According to the manufacturer, this configuration allows their dual-source system to operate most efficiently in middle latitude states.

Currently, GeoTech dual-source heat pumps operate in 12 test homes. According to preliminary findings, GeoTech expects its energy-efficiency to be within 5% of geothermal heat pumps but with a total installed cost of $1,000 to $2,500 less. Although payback periods for most geothermal systems are said to range from 3 to 7 years depending on climate, GeoTech expects its system to have a payback of 1-1/2 to 4 years.

GeoTech also offers an improved lower cost ground source heat pump system, based on design inprovements over poorly performing units sold by U.S. Power which went out of business.

Contact: Mike Housh, (513)423-1923.
Geothermal Technologies, Inc. , Middletown OH 45042

DK Heating (Electric Carpets II)

Subject: UFTO Note — DK Heating (Electric Carpets II)
Date: Sun, 16 Feb 1997 12:36:03 -0800
From: Ed Beardsworth

————————————————————–
| ** UFTO ** Edward Beardsworth ** Consultant
| 951 Lincoln Ave. tel 415-328-5670
| Palo Alto CA 94301-3041 fax 415-328-5675
| http://www.ufto.com edbeards@ufto.com
————————————————————–

DK Heating (Electric Carpets II)

Recalling the UFTO New Year’s note about Electric Carpets in Japan, several of you were interested. We’ve tried a number of avenues of inquiry, but the Japanese have proven impenetrable on this subject. Even trade officials here in San Francisco come up empty handed. These products are strictly for domestic use in Japan, and absolutely not for export. There must be an interesting story behind it, but we may never know.

In the meantime, however, similar products just now being introduced in the U.S. by a local subsidiary of a Israeli company, DK Heating Systems.

Radiant subfloor heating is a well known idea. One traditional form is hydronic, with pipes carrying hot water encased inside a slab floor. There are also electric systems, usually with a heavy electrical cable embedded into a thick layer of cement on top of the subfloor.

DK’s new technology uses a much thinner cable (less than 1/8 inch) based on electric blanket technology which is laid into the thin-set cement which fastens the tile or other flooring materials. They have 10’s of thousands of installations throughout Europe, and are now getting established in the U.S. market. They have complete U.L. approvals.

DK also has a line of mat-type products designed to go under carpeting. One of these, the “SHE 200 FS”, is already on the market. It is for use under permanently installed wall-to-wall carpet, and costs about $7/sq. ft. In typical installations, the product is installed in selected areas of the room, for example a seating area.

In addition, the U.S. subsidiary will soon begin promoting some new products. – Stand alone small heated carpets (18″x30″ and 24″x36″), e.g. for use under a desk – Heated Carpet Underlay pad for use under area rugs – Heated Rubber Mat (20″x20″) for tougher environments, e.g. outdoors, or a cashier stand

The U.S. subsidiary, domotecK, Inc., Streamwood, IL (outside Chicago) is soon to become an independent company under a management buy-out, and may be open to joint ventures and new investment for expansion in the U.S.

domotecK has a very well done web site with complete product information and the ability to respond on line with quotes when furnished with a floor plan.

http://www.domoteck.com

Contact: Georges Selvais, General Manager 1-800-875-5285